inkreloaded Flush - Cartridge and Print Head Cleaning Solution
Safely and effectively removes clogs and debris from cartridge print heads!

Overview

- Contains 4oz/120ml of EarthInkjet Flush
- Cleans cartridges that print blank pages or white lines or are missing colors
- Use EarthInkjet Flush to dissolve your ink clog then your printer will print just like new again!
- The solution is extremely effective and has been tried/tested for over 12 years.

Advantages

- Just a few drops dissolves dried ink in just minutes! (Deep clogs or "sludge" may take up to an hour to clear)
- Clears the cartridge print head and nozzles of other debris that causes streaking banding and poor quality printing.
- Make this part of every refill process to ensure clear flowing jets without the need to run an ink consuming cleaning cycle.
- The inkjet cartridge recycling industry has used this solution for several years to dissolve dried and coagulated ink!

Instructions

Method 1) Fill the syringe with 2ml. of cartridge and Print Head Cleaner and squirt the Cartridge and Print Head Cleaner onto the print head over the sink. Do not touch the print head with the needle point. The dried ink will immediately solubilize and wash away. Let it air dry and reinsert into the printer.

Method 2) Pour a 1/2"of Cartridge and Print Head Cleaner in a container and let the cartridge soak. (Use a cup the size of a coffee mug for this procedure). Allow it to air dry and reinstall into printer and run a cleaning cycle as per the printer instructions.

Method 3) Apply a small amount of Cartridge and Print Head Cleaner in a container onto a paper towel or soft tissue. Next sit the print head directly where the Cartridge and Print Head Cleaner was applied. Allow the cartridge to sit for 2minutes and then dab it dry with a clean tissue. To avoid damaging the printhead do not to rub the print head on the paper towel in any manner.

Method 4) Prior to every third refill inkjet 1/2-2ml. Of Cartridge and Print Head Cleaner (depending on the size of the cartridge) in order to prolong the life of the sponge inside the cartridge. Also adding the Cartridge and Print Head Cleaner before each refill solubilizes the trapped residue and prevents the sponge from collecting excess ink

Note: This is not alcohol or Windex; it is an ink-specific solvent that has proven to be safe and effective for use on ALL printheads and nozzles. Do not use alcohol or Windex as they will very likely ruin your printer. Do not mix with water.