769-0

1.Put a piece of tape over the exit hole located on the bottom of the cartridge

2.The filling hole is located on the back of the cartridge and must be widen using the included eyelet screw

3.Connect the needle to the syringe and fill with FLOUROESCENT RED ink.

4.Insert the syringe into the filling hole all the way down into the cartridge.

Note: This cartridge contains a sponge so you may feel a slight pressur.

5.Use your thumb to hold the tape in place while injecting 4 ml. of ink into the cartridge.

6.Rinse the syringe with water and dry for future use.

7.Reinsert the cartridge(s) and run a cleaning cycle as per postage machines
instructions

Note: Immediately refill any empty cartridges.