C5010A, C5011A

1.Drill filling holes on the top of the cartridge (as shown below left) or pry off the cartridge top as shown below right. Do the procedure that is easier for you. Use the hole making tool included in the kit, drill each filling hole on the top of the cartridge wide enough to fit the needle as shown below left. Or use a flathead screwdriver to pry off the top.

2.Connect the needle to the syringe and fill with the ink.

Note: All 3 filing holes must be refilled in the black cartridge

3.Insert the syringe through the filling hole and push all the way into the cartridge.

Note: You may feel a slight pressure because the cartridge contains a sponge.

4.Slowly inject up to 6 ml. of ink, per chamber, then seal the filling holes using a piece of tape.

5.Rinse the syringe with water and dry for future use, or use with a different color ink.

6.Reinsert the cartridge(s) and run a test page as per printer instructions.

Note: Immediately refill any empty cartridges.