REFILLING OF EPSON T078xxx, T077xxx, T054xxx

Note: Chip Resetter Required (sold separately)

1.It is important to understand the sections of this cartridge before refilling. Please study diagram closely.

2.Turn the cartridge upside down and use the eyelet screw tool provided in your
refill kit to create a refill hole at the bottom of the cartridge as illustrated in
picture B. The chambers of each part of the cartridge have been illustrated in pictures A. and B. All ink being refilled into the cartridge will enter the ink
chamber.

3.Using the eyelet screw, widen the hole. Keep the screw off center when widen
the hole, it should lean towards the right.

4.Connect the needle to the syringe and fill with the correct color ink.

5.Insert the needle at that same off center angle. The needle will go about half
way into the cartridge. Inject about 12 ml. of ink slowly into the filling hole
until the cartridge is almost full.

6.Wipe the filling hole clean and dry and then apply an included inkjet sealing
plug into the filling hole, making certain that the filling hole is completely
sealed.

7.Rinse the syringe with water and dry for further use, or use with a different
color ink.

8.Follow the resetting instructions for inserting cartridge into printer.

Note:This refill method only works on a compatible epson cartridges. Always remember to immediately refill any empty cartridges.