S020093, S020097, S020110, S020193,
S020187, S020189, S020191, S020089, S020093, S020108, S020047, S020049, S020097,

1.Put a piece of tape over each outlet hole(s) at the bottom of the cartridge.

2.Connect the needle to the syringe. Before filling the syringe with ink, use the needle tip to pierce through the label to create the filling hole. Then fill the syringe with the appropriate color ink.

3.Slowly inject approximately 8 ml. of ink, per color, until the cartridge is full.

4.Use tape to seal the hole(s) made in the top of the label.

5.Rinse the syringe with water and dry between each color refill or store for future use.

Follow this step for cartridges WITHOUT the smart chip:

6.Leave the tape on the outlet hole(s) and insert the cartridge into the printer and run 1 - 3 cleaning cycles as per printer instructions. It may be necessary to leave cartridge in printer for up to 24 hours to allow ink to flow to the print head.