S020062, S020118, S020122, S020130

1. The filling hole is the same hole as the hole that connects to the printer.

2.Note: The cartridge is lined in a delicate Mylar bag and it is very important not to insert the needle more than 3/4” or it is possible to pierce or tear the Mylar bag. Fill the syringe with the correct color ink and carefully insert the
needle into the filling hole and slowly inject approximately 90 ml. of ink into the cartridge.

3.Hold the cartridge upright with the filling hole at the top. Using the syringe, remove any trapped air in the cartridge by only inserting the tip of the needle and pulling up on the plunger until all air is removed.

4.Remove the syringe and rinse with water and dry for future use, or to use with a different color ink.

5.Reinsert the cartridge and run a priming cycle as per printer instructions.

Note : It is not necessary to disassemble the cartridge to refill it and we strongly recommend you do not. We have included a picture of the inside of the cartridge to satisfy your curiosity