BC-20 & BC-23
High Capacity Cartridge

1. Use the eyelet screw to remove plug located on top of the cartridge.

2. Connect the needle to the syringe and fill with ink.

3. Insert the syringe through the filling hole and push into the cartridge. Note: You may feel a slight pressure because the cartridge contains a sponge.

4. Inject up to 30 ml. of ink then reseal the cartridge with the plug that was removed from step 1.

5. Rinse the syringe with water and dry for future use, or use with a different color ink.

6. Reinsert the cartridge(s) and run a priming cycle as per printer instructions.

Note: Immediately refill any empty cartridges.