Black Cartridges: IN-700, LC11BK

1. Use the enclosed eyelet screw to enlarge the filling hole located at the top of the cartridge. (Do not remove the cap.)

2. Insert the needle into the filling hole and push down into the cartridge. Inject up to 20 ml. of ink or until the cartridge is full. Note: Immediately refill any empty cartridges.

Color Cartridges: IN-710C, LC11CL

1. The filling holes are located under the plastic cap. Use a thin flathead screwdriver or knife to remove the cap. Important: Do not to damage the sensors on the back of the cartridge.

2. Insert the needle into the matching hole of the color to be refilled, (see diagram above) and push into the cartridge. Note: You will feel a slight pressure because the cartridge contains a sponge.

3. Inject about 8 ml. of ink, per color, into the cartridge until the ink begins to bubble at the top of the sponge. Important: Do not overfill. Keep the sponge inside the cartridge white.

4. The cover can be reattached with a piece of tape.