LC03BC, LC03MY

1. The filling hole is the same hole as the hole that connects to the printer.

2. Note: The cartridge is lined in a delicate Mylar bag and it is very important not to insert the needle more than 3/4” or it is possible to pierce or tear the Mylar bag. Important: It is very important to turn the cartridge as shown in the pictures. If you have the cartridge reversed then you will put the wrong color of ink in the wrong fill hole. Fill the syringe with ink and carefully insert the needle into the filling hole and slowly inject about 4 ml. of ink into the cartridge.

3. Hold the cartridge up with the filling hole at the top. Using the syringe, remove any trapped air in the cartridge by only inserting the tip of the needle and pulling up on the plunger until all air is removed.

4. Remove the syringe and rinse with water and dry for future use, or to use with a different color ink.

5. Reinsert the cartridge and run a priming cycle as per printer instructions.