Black Cartridges:
IN-700, LC11BK

1.Use the enclosed eyelet screw to enlarge the filling hole located at the top of the cartridge. (Do not remove the cap.)

2.Connect the needle to the syringe and fill the syringe with 8 ml. of Cartridge & Print Head Cleaner and inject into the cartridge. Reinsert cartridge into printer and print 5 test pages.

3.Fill the syringe with ink. Insert the needle into the filling hole and push down into the cartridge. Inject up to 20 ml. of ink or until the cartridge is full.

Note:Immediately refill any empty cartridges

Color Cartridges:
IN-710C, LC11CL

1.The filling holes are located under the plastic cap. Use a thin flathead screw driver or knife to remove the cap.

Note:Do not to damage the sensors on the back of the cartridge.

2.Connect the needle to the syringe and fill with ink.

3.Insert the needle into the matching hole of the color to be refilled, (see diagram above) and push into the cartridge

Note: You will feel a slight pressure be cause the cartridge contains a sponge.

4.Inject about 8 ml. of ink, per color, into the cartridge until the ink begins to bubble at the top of the sponge.

Important: Do not overfill. Keep the sponge in side the cartridge white.

5. Rinse the needle and syringe with water and dry between each color refilling or store for future use.